China Medium voltage switchgear testing Manufacturer, Supplier, Factory

The KYN28-12(Z) 3.6KV 630A Medium Voltage Electrical Switchgear is designed for 12kV rated voltage and 50Hz rated frequency in three-phase AC power systems. It functions to handle electric energy reception and distribution, as well as to control, protect, and monitor circuits.

The DZ20 series plastic shell circuit breaker (hereinafter referred to as the circuit breaker) is suitable for distribution lines with AC 50Hz, rated current up to 1250A, rated insulation voltage of 660V, rated working voltage of 380V (400V) and below, as overload, short circuit and undervoltage protection for distributed electrical energy, lines and power equipment. Among them, the Y, J, and G type circuit breakers with rated currents of 225A and Y type 400A can also be used to protect motors. Under normal circumstances, the circuit breaker can be used for infrequent switching of lines and infrequent starting of motors. The product meets the standards of JB8589, GB14048.2, and IEC947-2.

The CFB3 series miniature circuit breaker is suitable for overload and short circuit protection in AC 50/60Hz, rated voltage up to 230V/400V, and rated current up to 125A lines. It can also be used for infrequent on/off operations of the line under normal conditions. The CFB3-63 series circuit breaker is equipped with accessories such as CFB3-F auxiliary contacts, CFB3-FB auxiliary alarm contacts, CFB3-FL shunt release, CFB3-QY undervoltage release, CFB3-GY overvoltage release, CFB3-GQY overvoltage release, etc., providing convenience for the intelligent control of smart buildings. Overvoltage, undervoltage, and overvoltage/undervoltage are electronic release devices that are assembled and combined with circuit breakers or residual current circuit breakers. They are suitable for AC 50Hz/60Hz circuits with a rated voltage of 230V, and are used to protect against overvoltage, undervoltage, and overvoltage caused by line faults, avoiding damage to electrical equipment or inability to function properly due to fluctuations in grid voltage. The circuit breaker has an isolation function. Compliant with standards: GB/T10963.1, IEC60898-1, GB/T20645.

The SC(B) series epoxy resin dry-type transformer has been meticulously designed to prioritize safety. Its flame-retardant, fire-proof, and explosion-proof features ensure the highest level of safety. The encapsulated winding allows for direct installation in the load center, providing a maintenance-free and pollution-free solution. The scientific and rational design, in combination with the casting process, yields a product with lower partial discharge, reduced noise, and superior heat dissipation capacity. When equipped with forced air cooling, it can operate for extended periods under a 125% rated load.

In recent years, with the advancement of technology and the growth of society and the economy, engineering construction has become increasingly intricate. There is a rising demand for compact switchgear that is low-maintenance and smart. Both local and global switch manufacturers are currently engaged in the development of 40.5KV 630A Sf6 Sulfur Hexafluoride Filled Gas Insulated Switchgear, which are also referred to as gas-insulated switchgear (C-GIS). This type of switchgear houses high-voltage elements like busbars, circuit breakers, isolating switches, and power cables in a container with reduced gas pressure.

The HXGN-12 switchgear Medium voltage AC metal ring main unit switchgear is a comprehensive set of high-voltage AC devices designed for use in three-phase AC ring networks, terminal distribution networks, and industrial electrical systems. Rated for 3.6-12kV and 50Hz, it serves as a reliable and protective solution for receiving, distributing, and regulating electricity. This product adheres to national standards GB3906 and IEC60298, as well as DL/T402 and DL/T404 standards, and meets the "five prevention" locking requirements, ensuring maximum safety and efficiency in its operation.